CoTexx® Knitted Heating Fabric - Accessories



Accessories

Also available are optional accessories for CoTexx® Knitted Heating Fabric. The presented products were newly developed or carefully selected, to meet the requirements of the heating system.

PT-100 Temperature Sensors

Our temperature sensors are characterized by their small dimensions and low thermal mass for a quick temperature response. They can be embedded close to the heating wires, which is important for measuring temperature directly at the heat source. Depending on the measuring system, the PT-100 sensors are equipped with two or three test leads made of high-frequency litz wire.

 

  • PT-100 sensor with 1,0 m leads, 2-wire-technique
  • PT-100 sensor with 1,0 m leads, 3-wire-technique

Threaded Sleeves

Contacting elements such as our threaded sleeves are particularly suitable for the processing of CoTexx® Knitted Heating Fabric in combination with infusion processes. The internal wires that connect the heating are soldered onto the copper foil of the contacting elements. The sleeves remain within the vacuum bag during infusion. Thus, neither air can penetrate, nor matrix flow into the cables. The connecting cables are simply screwed to the connection elements after curement.

 

  • M4-threaded sleeve, 15 mm, welded on copper foil
  • M5-threaded sleeve, 15 mm, welded on copper foil
  • M6-threaded sleeve, 15 mm, welded on copper foil

Threaded Studs

The threaded studs work on the same principle. They are welded onto a 0.3 mm thick copper sheet to which the flat strand leading to the heating elements is soldered. A shrink tube protects the thread from resin during infusion. All reinforcing layers placed above the heating layer are cut in such a way that the threaded bolts pierce the surface.

 

  • M4-threaded stud with 10 mm or 15 mm length, welded on copper foil
  • M5-threaded stud with 10 mm or 15 mm length, welded on copper foil
  • M6--threaded stud with10 mm or 15 mm length, welded on copper foil

Flat Strand

With the flat strand of made of bare copper fine wires, the individual elements of CoTexx® Knitted Heating Fabric can be electrically interconnected, to form the complete heating resistance.

 

  • Flat strand with 1,5 mm² cross section product sold by meter

CoTexx ISO 9001-2015 zertifiziert
Feel free to contact us for further information
Telephone: +49(0)8259 8287-81
info@cotexx.com